|
|
Big Boy Model
This is the BIGGEST thread stand in the world. Our BIG BOY holds
over 70 spools of thread.
Top Shelf - Top shelf works with (11) tension disks
that control the thread as your sewing or embroidering. The top
shelf can handle regular spool sizes, and the base of the
spool can not be wider than 1 1/2". We also have included
on the top shelf a dowel tower for holding your prewound bobbins.
VERY VERY handy!!!
Bottom Shelf - The 2nd shelf is a holding shelf.
Holds over(40) of your other spools of thread.
You'll receive your thread stand with (11) tensioner disks which
control the tension on your exterior threads. No more spools falling
on the floor or breaking needles & threads. Our (patent pending)
tensioner disks will control your exterior thread so your sewing or
embroidering will run so much smoother through your machine. After
using our unique tensioner disks you'll wonder how you ever worked
without them.
Dimensions - 24" wide, 24" tall, 16" deep
Make sure your machine will fit on this thread stand bottom base platform.
Measurement of area for machine to sit on is 24" wide x 11" deep. The 11" is
from front to back of your base bottom platform.
Special Features of stand
- Works wonderful with TWIN NEEDLES
- Holds over (70) regular spools & (1) XLARGE spool
- Special dowel tower in front to hold your prewound BOBBINS
- A tensioner disk for each row of (3) spool dowels (total of 10)
- Separate tensioner disk for XLARGE spools
- Works excellent from behind ALL machines
- Tensioner disks are adjustable for thicker to thinner threads
- Has rubber disks for bottom for non-slip
- Comes 99.9% assembled (2 predrilled screws to insert in Xlarge thread tower)
- Made with select quality wood & Made in the good ole USA
Your BIG BOY THREAD STAND will be delivered NATURAL. We do this so you may,
stain or paint your stand to your choice colors, but we do recommend putting
sealant on ALL unfinished wood products.
|
|
|
